- Static variable in interface com.esri.arcgis.geometry.
(0x8004024c) The operation would result in the creation of a new part, but the type of part to be created was ambiguous.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004026c) The authority parameter is too long.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004021c) The specified splitting distance is not included in the curve to be split.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040232) The Relate operator couldn't evalute the specified relation expression.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040243) ExtendEmbedded not implemented for Bezier curves.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040262) There was a problem obtaining a distance at which to buffer a geometry.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004026b) The buffer distance must be a valid floating point number.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004026a) The end option used by the BufferConstruction service must be one of: esriBufferFlat, esriBufferRound.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040269) The side option used by the BufferConstruction service must be one of: esriBufferLeft, esriBufferRight, esriBufferFull.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040266) A client has attempted to re-enter a BufferConstruction object while its ConstructBuffers...
- Static variable in interface com.esri.arcgis.geometry.
(0x80040267) An error occurred during the buffer operation.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004023b) The buffer coordinates are out of bounds.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040272) Cannot do 3D operations on curve segments.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004025f) No segment available to determine extrapolation ratio.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040231) A cut operation could not classify all parts of the polygon as being left or right of the cutting polyline.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040274) Some combinations of geometries with vertical segments cannot be evaluated with a 9DEM relational expression.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040225) Not used.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004021e) Not used.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040242) Can't use ConstructUnion on a point.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040253) The operation could not be performed because the geometry is degenerate.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040255) The same segment has been added to the geometry more than once.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004025d) Cannot merge the two geometries.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040260) Cannot merge the two geometries.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040202) An operation on an empty geometry was attempted - for example, trying to move or rotate one.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040223) Not used.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004024f) An interior part must be specified.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004022f) The fillet could not be constructed according to specs.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040241) Not used.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040229) Input geometries do not have same dimensions.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040203) The input parameters could not be reasonably interpreted - for example, asking for the 2d result of a polyline/polygon intersection.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040215) Input geometries do not have same spatial reference.输入几何要素的空间参考不一致或缺失。
- Static variable in interface com.esri.arcgis.geometry.
(0x8004025c) The geometries must be polylines or polygons.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004025b) The geometries are not all of the same type.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040256) The number of control points is insufficient.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040219) Not used.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040239) An internal error has occurred in the geometry system.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004020d) An arc construction operation was given an invalid angle.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040230) An elliptic arc construction operation was given invalid axes.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040205) An arc construction operation was given an invalid chord distance.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040204) An arc construction operation was given an invalid radius.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040246) Not used.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004024e) The number of items specified is too high or too low in the given context.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004024d) The ordering of rings and types is invalid.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004024b) The given ring is not of the required type within the multipatch.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040271) The m coordinates of this geometry are out of bounds.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040226) Not used.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040206) Not used.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040221) Something other than a geometry was encountered.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040249) Something other than a multipatch was encountered.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040207) Not used.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004020e) Not used.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040210) Something other than a point was added to a multipoint.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004021f) Something other than a polygon was encountered.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040220) Something other than a polyline was encountered.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004020f) Not used.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040251) The input interface does not belong to a triangle fan object.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040250) The input interface does not belong to a triangle strip object.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040252) The input interface does not belong to a 3-dimensional vector.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004023f) The SegmentGraphCursor has no unfinished MoveTo operation.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040257) The participating segments must be Bezier curves.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040240) The geometry is not ID-aware.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040235) The geometry is not M-aware.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040245) The geometry has undefined M values for some of its vertices.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040273) The reshaping polyline must have one part.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040234) The geometry is not Z-aware.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040244) The geometry has undefined Z values for some of its vertices.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040218) The operation cannot be performed on a non-simple geometry.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004021d) A null geometry does not correspond to any ESRI geometry type.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040263) The geometry operation was cancelled.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040238) The coordinates of this geometry are out of bounds.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004023c) There is not enough memory.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004026e) An input parameter is too small.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004025e) A polygon part has no defined zs.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040217) The part could not be found in the geometry.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004022e) The project method cannot do a datum transformation directly on segments.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004023d) The relation expression string has a syntax error.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040208) Envelopes cannot be rotated.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040236) A SegmentGraph can only organize polyline and polygon objects.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040237) The geometries could not be topologically structured.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004022c) Something went wrong in Polygon/Polyline simplification.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004025a) The geometry is m-aware, but its spatial reference has no m domain or resolution defined.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040259) The geometry is z-aware, but its spatial reference has no z domain or resolution defined.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040268) The xy cluster tolerance was too large for the extent of the data.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004023a) This operation produced too many points.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040258) The transformation is undefined.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040209) Envelopes cannot have arbitrary transformations applied to them.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040227) The operation requires the presence of a spatial reference.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004024a) The multipatch contains a ring that is invalid or has an undefined type.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004020c) The parameters to a geometric construction did not provide enough information to complete the construction.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040261) Cannot convert between linear and angular units.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004023e) An unknown error has occurred in the geometry system.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004020b) The GeometryEnvironment did not know how to create a geometry of the specified type.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004026d) The WKT(Z) parameter is too long.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040265) The specified combination of relation and geometry types is not valid.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004020a) The geometry parameter was of the wrong type for the method.
- Static variable in interface com.esri.arcgis.geometry.
(0x80040270) The z coordinates of this geometry are out of bounds.
- Static variable in interface com.esri.arcgis.geometry.
(0x8004026f) The z or m coordinates of this geometry are out of bounds.